Leitfaden für die Verwendung von Glasfaser-Nacktfaseradaptern

A bare fiber optic adapter is a medium for connecting bare fibers to fiber optic equipment, such as OTDR, Of course, it can also be used as a temporary fiber optic accessory

Step one

Prepare materials: Bare Fiber Adapter, cleaning paper, industrial alcohol, fiber optic cutting pen, fiber optic stripper.

Step one:
Prepare materials: bare fiber adapter, cleaning paper, industrial alcohol, fiber optic cutting pen, fiber optic stripper.

Schritt 2

Strip the fiber coating layer by 15-20mm.

Step one:
Prepare materials: bare fiber adapter, cleaning paper, industrial alcohol, fiber optic cutting pen, fiber optic stripper.

Step 3

Clean the bare fiber with industrial alcohol and cleaning paper.

Step 4

Press the bare fiber adapter switch down (square bare fiber adapter press the clamp plate, round bare fiber adapter press the round button), push the optical fiber along the introduction hole slowly until the bare fiber exceeds the ceramic core by 4-6mm, then release the optical fiber switch to tighten the optical fiber.

Step 5

Use the fiber optic cutting pen to cut off the bare fiber part of the ceramic ferrule.