{"id":21443,"date":"2026-07-26T18:00:10","date_gmt":"2026-07-26T10:00:10","guid":{"rendered":"https:\/\/www.luleey.com\/?post_type=product&#038;p=21443"},"modified":"2026-07-26T18:09:11","modified_gmt":"2026-07-26T10:09:11","slug":"fc-upc-fixed-fiber-optic-attenuator-single-mode-optical-attenuator-0db-to-30db","status":"publish","type":"product","link":"https:\/\/www.luleey.com\/de\/produkt-2\/fc-upc-fixed-fiber-optic-attenuator-single-mode-optical-attenuator-0db-to-30db\/","title":{"rendered":"FC UPC Fixed Fiber Optic Attenuator, Single Mode Optical Attenuator 0dB to 30dB"},"content":{"rendered":"<h2>Produkt\u00fcbersicht<\/h2>\n<p>The Luleey FC UPC Fixed Fiber Optic Attenuator is a passive optical component used to reduce optical signal power by a fixed attenuation value in single mode fiber networks. It is commonly used when the received optical power is too strong for the optical receiver, or when engineers need to balance link budgets during installation, testing, and maintenance.<\/p>\n<p>This FC UPC Attenuator is suitable for telecom rooms, ODF systems, optical transceivers, media converters, switches, routers, servers, storage devices, fiber test equipment, and general single mode optical communication links.<\/p>\n<p>Compared with APC attenuators, FC\/UPC attenuators are better suited for general optical links, lab testing, data communication systems, transceiver testing, and equipment connections where UPC interfaces are already used. If your fiber equipment, patch cable, or adapter is FC\/UPC, this FC UPC Fixed Fiber Optic Attenuator is the correct matching connector type.<\/p>\n<p>Luleey provides multiple fixed attenuation values from 0dB to 30dB, helping installers and network engineers select the proper optical power reduction value for different fiber link requirements.<\/p>\n<h2>Eigenschaften<\/h2>\n<ul>\n<li>FC UPC Fixed Fiber Optic Attenuator for single mode fiber networks<\/li>\n<li>Feste D\u00e4mpfungswerte f\u00fcr eine stabile Reduzierung der optischen Leistung<\/li>\n<li>FC\/UPC connector for general single mode optical links<\/li>\n<li>Verf\u00fcgbarer D\u00e4mpfungsbereich von 0 dB bis 30 dB (feste Werte)<\/li>\n<li>Sch\u00fctzt optische Empf\u00e4nger vor \u00fcberm\u00e4\u00dfiger Eingangsleistung<\/li>\n<li>Helps balance optical link budget in telecom, ODF, data communication, and fiber testing systems<\/li>\n<li>Suitable for optical transceiver testing and receiver power adjustment<\/li>\n<li>Geringe Einf\u00fcgungsd\u00e4mpfung und gute Wiederholgenauigkeit<\/li>\n<li>Passive optische Komponente mit Plug-and-Play-Funktion<\/li>\n<li>Reusable design for installation, testing, and maintenance<\/li>\n<li>Suitable for switches, routers, media converters, optical transceivers, servers, fiber NICs, storage devices, and test tools<\/li>\n<li>Factory tested by Luleey for practical optical network deployment<\/li>\n<\/ul>\n<h2>Anwendungen<\/h2>\n<ul>\n<li>Glasfaserverbindungen im Telekommunikationsraum<\/li>\n<li>ODF \u2013 Optische Verteilung<\/li>\n<li>Einstellung der optischen Leistung<\/li>\n<li>Ausgleich des Link-Budgets bei Glasfaserverbindungen<\/li>\n<li>Schutz des optischen Empf\u00e4ngers<\/li>\n<li>Pr\u00fcfung und Wartung von Glasfasern<\/li>\n<li>Pr\u00fcfung optischer Transceiver<\/li>\n<li>Bereitstellung von Medienkonvertern<\/li>\n<li>Glasfaserverbindungen zwischen Switches und Routern<\/li>\n<li>Glasfaserverbindungen f\u00fcr Server und Speichersysteme<\/li>\n<li>Data Communication Systems<\/li>\n<li>Optische Laborpr\u00fcfungen<\/li>\n<li>General Single Mode Fiber Networks<\/li>\n<\/ul>\n<h2>Spezifikationen<\/h2>\n<table>\n<thead>\n<tr>\n<th>Parameter<\/th>\n<th>Wert<\/th>\n<\/tr>\n<\/thead>\n<tbody>\n<tr>\n<td>Marke<\/td>\n<td>Luleey<\/td>\n<\/tr>\n<tr>\n<td>Produkttyp<\/td>\n<td>FC UPC Fixed Fiber Optic Attenuator<\/td>\n<\/tr>\n<tr>\n<td>Stecker Typ<\/td>\n<td>FC\/UPC<\/td>\n<\/tr>\n<tr>\n<td>D\u00e4mpfungsgliedtyp<\/td>\n<td>Fester Wert<\/td>\n<\/tr>\n<tr>\n<td>Faser-Typ<\/td>\n<td>Einmodenfaser<\/td>\n<\/tr>\n<tr>\n<td>Verf\u00fcgbare D\u00e4mpfungswerte<\/td>\n<td>0 dB, 1 dB, 2 dB, 3 dB, 4 dB, 5 dB, 6 dB, 7 dB, 8 dB, 9 dB, 10 dB, 11 dB, 12 dB, 13 dB, 14 dB, 15 dB, 16 dB, 17 dB, 18 dB, 19 dB, 20 dB, 25 dB, 27 dB, 30 dB<\/td>\n<\/tr>\n<tr>\n<td>D\u00e4mpfungsbereich<\/td>\n<td>Feste Werte von 0 dB bis 30 dB<\/td>\n<\/tr>\n<tr>\n<td>Typische Anwendung<\/td>\n<td>Reduzierung der optischen Signalleistung und Anpassung des Link-Budgets<\/td>\n<\/tr>\n<tr>\n<td>R\u00fcckflussd\u00e4mpfung<\/td>\n<td>Konstruktion mit hohem R\u00fccklaufverlust<\/td>\n<\/tr>\n<tr>\n<td>Einf\u00fcged\u00e4mpfung<\/td>\n<td>Konstruktion mit geringem Einf\u00fcgungsverlust<\/td>\n<\/tr>\n<tr>\n<td>Lebensdauer des Plug-ins<\/td>\n<td>Mehr als 1000 Mal<\/td>\n<\/tr>\n<tr>\n<td>Anwendungsausr\u00fcstung<\/td>\n<td>Optische Transceiver, Switches, Router, Medienkonverter, Server, Glasfaser-Netzwerkkarten, Speicherger\u00e4te, optische Testger\u00e4te<\/td>\n<\/tr>\n<tr>\n<td>Netzwerkanwendung<\/td>\n<td>Telecom, ODF, optical distribution, data communication, fiber testing<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<h2>Why Use an FC UPC Fiber Optic Attenuator?<\/h2>\n<p>A fiber optic attenuator is used when the optical signal power is too high for the receiving device. Too much optical power may overload the receiver and cause unstable links, device alarms, packet loss, or poor performance.<\/p>\n<p>Ein festes D\u00e4mpfungsglied hilft dabei:<\/p>\n<ul>\n<li>\u00dcberm\u00e4\u00dfige optische Leistung reduzieren<\/li>\n<li>Optische Empf\u00e4nger sch\u00fctzen<\/li>\n<li>Optische Verbindungsbudgets ausgleichen<\/li>\n<li>\u00dcberlastung des Empf\u00e4ngers verhindern<\/li>\n<li>Verbesserung der Verbindungsstabilit\u00e4t<\/li>\n<li>Unterst\u00fctzung bei der Pr\u00fcfung von Glasfasern und der Fehlerbehebung<\/li>\n<li>Simulation von Faserverlusten in Laborumgebungen<\/li>\n<li>Die Anforderungen an die optische Leistung verschiedener Ger\u00e4te aufeinander abstimmen<\/li>\n<\/ul>\n<p>For data communication, optical transceiver testing, telecom, ODF, and general single mode fiber applications, the Luleey FC UPC Fixed Fiber Optic Attenuator is a practical passive component for optical power control.<\/p>\n<h2>FC UPC vs FC APC Attenuator<\/h2>\n<p>FC UPC and FC APC attenuators use different connector end-face structures. They should be selected according to the actual connector type used by the equipment and patch cable.<\/p>\n<table>\n<thead>\n<tr>\n<th>Stecker Typ<\/th>\n<th>Am besten f\u00fcr<\/th>\n<\/tr>\n<\/thead>\n<tbody>\n<tr>\n<td>FC UPC D\u00e4mpfungsglied<\/td>\n<td>General single mode optical links, optical transceiver testing, test equipment, data communication systems<\/td>\n<\/tr>\n<tr>\n<td>FC APC-D\u00e4mpfungsglied<\/td>\n<td>Low-reflection single mode links, FTTH, CATV, PON, telecom, optical distribution systems<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<p>Choose FC\/UPC when the connected device, patch cable, adapter, or test equipment also uses FC\/UPC.<\/p>\n<p>Choose FC\/APC when the fiber line or optical equipment requires APC angled polish and lower back reflection.<\/p>\n<p>Do not directly mix UPC and APC connector end-faces, because this may cause poor contact, higher loss, stronger reflection, and unstable optical performance.<\/p>\n<h2>So w\u00e4hlen Sie den richtigen D\u00e4mpfungswert aus<\/h2>\n<p>Der richtige D\u00e4mpfungswert h\u00e4ngt vom Eingangsbereich des optischen Empf\u00e4ngers und der tats\u00e4chlich empfangenen optischen Leistung ab. Bevor Sie den dB-Wert festlegen, messen Sie die aktuelle optische Leistung mit einem optischen Leistungsmesser.<\/p>\n<table>\n<thead>\n<tr>\n<th>D\u00e4mpfungswert<\/th>\n<th>Typische Anwendung<\/th>\n<\/tr>\n<\/thead>\n<tbody>\n<tr>\n<td>0dB<\/td>\n<td>Referenzverbindung, spezielle Pr\u00fcfung, Verbindungsanpassung oder keine absichtliche D\u00e4mpfung<\/td>\n<\/tr>\n<tr>\n<td>1 dB bis 3 dB<\/td>\n<td>Leichte Anpassung der optischen Leistung<\/td>\n<\/tr>\n<tr>\n<td>4 dB bis 7 dB<\/td>\n<td>Mittlere Reduzierung der optischen Leistung<\/td>\n<\/tr>\n<tr>\n<td>8 dB bis 12 dB<\/td>\n<td>St\u00e4rkere Reduzierung der optischen Leistung bei starken Empfangssignalen<\/td>\n<\/tr>\n<tr>\n<td>13 dB bis 20 dB<\/td>\n<td>Starke D\u00e4mpfung bei kurzen Verbindungen, zur Regelung der hohen Eingangsleistung oder zum Schutz des Empf\u00e4ngers<\/td>\n<\/tr>\n<tr>\n<td>25 dB \/ 27 dB \/ 30 dB<\/td>\n<td>Sehr starke D\u00e4mpfung f\u00fcr Labortests, Hochleistungs-Glasfaserverbindungen oder die Simulation von Link-Budgets<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<p>Der ausgew\u00e4hlte D\u00e4mpfungsglied sollte die empfangene optische Leistung auf einen sicheren und stabilen Betriebsbereich reduzieren.<\/p>","protected":false},"excerpt":{"rendered":"<p class=\"isSelectedEnd\">The Luleey FC UPC Fixed Fiber Optic Attenuator is designed to reduce optical signal power in single mode fiber networks with stable fixed attenuation values from 0dB to 30dB, helping protect optical receivers, balance link budgets, and optimize signal levels in telecom, data communication, fiber testing, ODF, and optical transceiver applications.<\/p>\n<ul data-spread=\"false\">\n<li>FC\/UPC connector for general single mode fiber networks<\/li>\n<li>Verf\u00fcgbare Festwerte: 0 dB, 1 dB, 2 dB, 3 dB, 4 dB, 5 dB, 6 dB, 7 dB, 8 dB, 9 dB, 10 dB, 11 dB, 12 dB, 13 dB, 14 dB, 15 dB, 16 dB, 17 dB, 18 dB, 19 dB, 20 dB, 25 dB, 27 dB, 30 dB<\/li>\n<li>Tr\u00e4gt dazu bei, \u00fcberm\u00e4\u00dfige optische Leistung zu reduzieren und den Verlust in der Glasfaserverbindung auszugleichen<\/li>\n<li>UPC polish is suitable for general optical links, test equipment, transceivers, and data communication systems<\/li>\n<li>Die 0-dB-Option kann f\u00fcr Referenzanschl\u00fcsse oder spezielle Testanwendungen verwendet werden.<\/li>\n<li>Die Optionen 25 dB, 27 dB und 30 dB eignen sich f\u00fcr eine starke Reduzierung der optischen Leistung oder f\u00fcr Laborsimulationen<\/li>\n<li>Geeignet f\u00fcr optische Transceiver, Medienkonverter, Switches, Router, Server, Glasfaser-Netzwerkkarten, Speicherger\u00e4te und optische Testger\u00e4te<\/li>\n<\/ul>","protected":false},"featured_media":21445,"comment_status":"open","ping_status":"closed","template":"","meta":[],"product_brand":[],"product_cat":[788],"product_tag":[402,395,1299,1291,1292,1297,1293,1179,1298],"class_list":["post-21443","product","type-product","status-publish","has-post-thumbnail","product_cat-optical-attenuator","product_tag-attenuator","product_tag-fc-upc-attenuator","product_tag-fiber-attenuator","product_tag-fiber-optic-attenuator","product_tag-fixed-attenuator","product_tag-fixed-fiber-optic-attenuator","product_tag-optical-attenuator","product_tag-single-mode-fiber","product_tag-single-mode-optical-attenuator","first","instock","shipping-taxable","purchasable","product-type-variable","has-default-attributes"],"_links":{"self":[{"href":"https:\/\/www.luleey.com\/de\/wp-json\/wp\/v2\/product\/21443","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/www.luleey.com\/de\/wp-json\/wp\/v2\/product"}],"about":[{"href":"https:\/\/www.luleey.com\/de\/wp-json\/wp\/v2\/types\/product"}],"replies":[{"embeddable":true,"href":"https:\/\/www.luleey.com\/de\/wp-json\/wp\/v2\/comments?post=21443"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/www.luleey.com\/de\/wp-json\/wp\/v2\/media\/21445"}],"wp:attachment":[{"href":"https:\/\/www.luleey.com\/de\/wp-json\/wp\/v2\/media?parent=21443"}],"wp:term":[{"taxonomy":"product_brand","embeddable":true,"href":"https:\/\/www.luleey.com\/de\/wp-json\/wp\/v2\/product_brand?post=21443"},{"taxonomy":"product_cat","embeddable":true,"href":"https:\/\/www.luleey.com\/de\/wp-json\/wp\/v2\/product_cat?post=21443"},{"taxonomy":"product_tag","embeddable":true,"href":"https:\/\/www.luleey.com\/de\/wp-json\/wp\/v2\/product_tag?post=21443"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}