- カスタム xgs-ポン SFP+スティックモジュール、8311コミュニティファームウェア対応
- SFP+ XGSPON ONUスティック X-ONU-SFPP 1GBのRAMを搭載したハイパフォーマンス
- チップはPRX126。 ワズ110
- AT&Tなどの米国/カナダ/英国の通信サービスプロバイダーで広く使用されています。
- PON シリアル番号 (ONT ID)/ベンダー ID/機器 ID/論理 ONU ID/論理パスワード/MAC の変更をサポートします。
- UniFi Dream、Mikrotik、ubiquiti、TP-LINKなど様々な機器と互換性があります。
目次
- Stickウェブ管理へのログイン準備
- ログインスティック
- Change default IP
- PON情報の設定
- VLAN setting
- Pon Status
- Change password
- Firmware Upgrade
Stickウェブ管理へのログイン準備
スティックにログインする前に、スティックと PC 間の接続が正常であることを確認する必要があります。
ステップ1 PCのIPアドレスを192.168.1.x(2~254)に設定し、サブネットマスクは255.255.255.0です。
ステップ 2 スティックの IP アドレスを Ping します (デフォルト アドレスは 192.168.1.1)。PC が Ping コマンドから正しい応答を受け取ることができれば、PC とスティック間の接続が正常であることを意味します。
ログインスティック
ステップ1 エクスプローラーブラウザを開き、IP アドレス http://192.168.1.1 を入力します。
(デフォルトのIPを固定)
ステップ2 ログインにはユーザー名とパスワードが必要です。デフォルトのユーザー名とパスワードはスティックの底のラベルに記載されています。デフォルトの管理者ユーザー名は「根” パスワードは “根” または null です。

Change default IP
The XGSPON STICK default IP is 192.168.1.1, you can modify it with menu 8311-Configuration-Management.

PON情報の設定
bypass ISP, you can modify something with menu 8311-Configuration-PON. you can copy it from your old ONT.
- PON Serial Number (ONT ID)/Vendor ID/Equipment ID/Hardware Version/Logical ONU ID/Logical Password
- PON Mode, XGSPON or XGPON
The OLT shall support legitimacy authentication of the ONU based on the serial number (SN) method, based on the password, SN+Password, and logical ONU ID method (LOID).
Among them, the Password authentication method adopts the Registration_ID field (hereinafter referred to as Registration ID) in the Registration message to carry the authentication information, and the effective length of the authentication information carried by the Registration_ID shall be specifiable.

VLAN setting
VLAN is very important. you can copy it from your old ONT.

Pon Status
State-specific definitions and state transfer methods.
Change password
you can modify the password with the menu System-Administrator-Router Password.

Firmware Upgrade
8311 was-110 firmware is great firmware, LL-XS1025 サポート 8311 was-110 firmware.You can download the latest firmware from github and upgrade it.
note: if A or B firmware is empty, dont use the switch firmware function.
