Testeur RJ11 RJ45 SC8108

USD $23.99

1 avis
UGS : RJ11 RJ45 Tester Catégorie : Étiquettes : , ,

Testeur RJ11/RJ45

1. Le balayage automatique est adopté pour des tests rapides.
2. Forme aérodynamique et conception ergonomique.
3. Conception anti-chute et anti-lumière, plus conforme à la construction du site.

Paiement sécurisé garanti

Description

RJ45 Tester For transportation safety, no batteries will be provided. Thank you for your understanding.

Produit Caractéristiques

1. Le balayage automatique est adopté pour des tests rapides.
2. Forme aérodynamique et conception ergonomique.
3. Conception anti-chute et anti-lumière, plus conforme à la construction du site.

Test method:

1. Test twisted pair wire 1, 2, 3, 4, 5, 6, 7, 8, G root by root (right) to determine which wrong wire, short circuit and open circuit.
2. Switch “OFF” means OFF, ON means normal test speed, and “S” means slow test speed.
3. Twisted-pair testing: turn on the power, plug the network cable into the main tester and the remote tester respectively, and the host indicator light flashes one by one from 1 to G, as shown in the following figure:
Main tester: 1-2-3-4-5-6-7-8-g
Remote tester: 1-2-3-4-5-6-7-8-g (RJ45)
The 1-2-3-4 — — — — — — — — — – (RJ11)
If the connection is not normal, display as follows:
A. When there is a network cable, such as the no. 3 circuit, the main tester and the no. 3 lamp at the remote test end will not light up.
B. When several lines are disconnected, several lines will not light up. When fewer than two lines are connected, the light will not light up.
C. When the two ends of the network lines are out of order, as shown in example 2 and 4, they are shown as follows:
Main tester unchanged: 1-2-3-4-5-6-7-8-g
The remote test end is: 1-4-3-2-5-6-7-8-g
D. When there are 2 short circuits in the network cable, the main tester will not light up, while the remote test end shows that both of the short circuits will be slightly bright. If there are more than 3 (including 3), all the lights of the several lines in the short circuit will not light up.
4. If measuring distribution frame and wall block module, two matching jumpers (such as 110P4-RJ45) shall be led to the tester.
5. Coaxial cable test: if the cable is good, the BNC lights on both ends flash green at the same time.

  • Test cable: RJ45 RJ11
  • Power supply: DC 9V laminated battery
  • Power consumption: 25 ma
  • Size: 105 * 105 * 26 mm
  • Weight: 200 g
Informations complémentaires
Poids 0,4 kg
Dimensions 10 × 10 × 10 cm
couleur

1pcs

Avis (1)

1 avis pour Testeur RJ11 RJ45 SC8108

5,0
Basé sur 1 avis
5 étoiles
100
100%
4 étoiles
0%
3 étoiles
0%
2 étoiles
0%
1 étoile
0%
  1. Fernand Aveline -

    perfect

    (0) (0)
Ajouter un Avis
Q & R

Q & R

Poser une question
Il n'y a pas encore de questions.

Produits apparentés

Choix des options Ce produit a plusieurs variations. Les options peuvent être choisies sur la page du produit

Convertisseur de média SFP 1000M

Plage de prix : USD $10.99 à USD $12.99
Choix des options Ce produit a plusieurs variations. Les options peuvent être choisies sur la page du produit

Commutateur Gigabit Etherbet Fibre 2xSC 4xRJ45 3km 20km convertisseur de média

Plage de prix : USD $29.99 à USD $34.99
Choix des options Ce produit a plusieurs variations. Les options peuvent être choisies sur la page du produit

Commutateur POE inversé 100M 8RJ45 Ethernet Switch PCBA Board Industrial Grade

Plage de prix : USD $15.99 à USD $18.99
Choix des options Ce produit a plusieurs variations. Les options peuvent être choisies sur la page du produit

2SC 8RJ45 1000M Fibre Optique Media Converter Ethernet Switch PCBA Board Industrial Grade

Plage de prix : USD $29.99 à USD $33.99
Choix des options Ce produit a plusieurs variations. Les options peuvent être choisies sur la page du produit

8SC 2RJ45 1000M Fibre Optique Media Converter Ethernet Switch PCBA Board Industrial Grade

Plage de prix : USD $48.99 à USD $52.99

Produits récemment consultés