FC UPC Fixed Fiber Optic Attenuator, Single Mode Optical Attenuator 0dB to 30dB

제품 개요

The Luleey FC UPC Fixed Fiber Optic Attenuator is a passive optical component used to reduce optical signal power by a fixed attenuation value in single mode fiber networks. It is commonly used when the received optical power is too strong for the optical receiver, or when engineers need to balance link budgets during installation, testing, and maintenance.

This FC UPC Attenuator is suitable for telecom rooms, ODF systems, optical transceivers, media converters, switches, routers, servers, storage devices, fiber test equipment, and general single mode optical communication links.

Compared with APC attenuators, FC/UPC attenuators are better suited for general optical links, lab testing, data communication systems, transceiver testing, and equipment connections where UPC interfaces are already used. If your fiber equipment, patch cable, or adapter is FC/UPC, this FC UPC Fixed Fiber Optic Attenuator is the correct matching connector type.

Luleey provides multiple fixed attenuation values from 0dB to 30dB, helping installers and network engineers select the proper optical power reduction value for different fiber link requirements.

특징

• FC UPC Fixed Fiber Optic Attenuator for single mode fiber networks
• 안정적인 광 출력 감소를 위한 고정 감쇠 값
• FC/UPC connector for general single mode optical links
• 0dB에서 30dB까지의 고정값으로 설정 가능한 감쇠 범위
• 과도한 입력 전력이 광 수신기에 미치는 영향을 방지하는 데 도움이 됩니다.
• Helps balance optical link budget in telecom, ODF, data communication, and fiber testing systems
• Suitable for optical transceiver testing and receiver power adjustment
• 낮은 삽입 손실과 우수한 재현성
• 플러그 앤 플레이 방식의 수동 광학 소자
• Reusable design for installation, testing, and maintenance
• Suitable for switches, routers, media converters, optical transceivers, servers, fiber NICs, storage devices, and test tools
• Factory tested by Luleey for practical optical network deployment

애플리케이션

• 통신실 광섬유 연결
• ODF 광 분배기
• 광 출력 조정
• 광섬유 링크 예산 균형 조정
• 광 수신기 보호
• 광섬유 검사 및 유지보수
• 광 트랜시버 테스트
• 미디어 컨버터 구축
• 스위치 및 라우터 간 광섬유 연결
• 서버 및 스토리지의 파이버 연결
• Data Communication Systems
• 실험실 광학 시험
• General Single Mode Fiber Networks

사양

Why Use an FC UPC Fiber Optic Attenuator?

A fiber optic attenuator is used when the optical signal power is too high for the receiving device. Too much optical power may overload the receiver and cause unstable links, device alarms, packet loss, or poor performance.

고정 감쇠기는 다음과 같은 이점이 있습니다:

• 과도한 광 출력을 줄이십시오
• 광 수신기 보호
• 광 링크 예산의 균형 조정
• 수신기 과부하 방지
• 링크 안정성 향상
• 광섬유 테스트 및 문제 해결 지원
• 실험실 환경에서 광섬유 손실을 시뮬레이션하기
• 서로 다른 장치 간의 광 출력 요구 사항을 일치시킵니다.

For data communication, optical transceiver testing, telecom, ODF, and general single mode fiber applications, the Luleey FC UPC Fixed Fiber Optic Attenuator is a practical passive component for optical power control.

FC UPC vs FC APC Attenuator

FC UPC and FC APC attenuators use different connector end-face structures. They should be selected according to the actual connector type used by the equipment and patch cable.

Choose FC/UPC when the connected device, patch cable, adapter, or test equipment also uses FC/UPC.

Choose FC/APC when the fiber line or optical equipment requires APC angled polish and lower back reflection.

Do not directly mix UPC and APC connector end-faces, because this may cause poor contact, higher loss, stronger reflection, and unstable optical performance.

How to Choose the Right Attenuation Value

The correct attenuation value depends on the optical receiver input range and the actual received optical power. Before choosing the dB value, measure the current optical power with an optical power meter.

The selected attenuator should reduce the received optical power into a safe and stable operating range.