مقسم PLC 1×16، وحدة صغيرة مقاس 0.9 مم، نمط أحادي SC/UPC
دولار أمريكي $16.99
- خصومات تلقائية للشركات الصغيرة
- يمكنك مزج ومطابقة منتجات الكابلات والمقسمات المؤهلة:
- 10 عناصر أو أكثر → وفر 10%
- 20 قطعة أو أكثر → وفر 12%
اللولي 1×16 PLC Splitter divides one single mode optical input into sixteen SC/UPC outputs across 1260–1650nm for FTTH and PON networks.
- 1 input to 16 equal optical outputs
- SC/UPC connector termination
- Single mode ITU-T G.657A optical fiber
- 0.9mm protected fiber leads
- Wide operating wavelength: 1260–1650nm
- Maximum insertion loss ≤14.0dB
- Loss uniformity ≤1.0dB
- Polarization dependent loss ≤0.3dB
- Return loss and directivity ≥55dB
- Fully passive operation without external power
عملية دفع آمنة ومضمونة

1×16 PLC Splitter Overview
الـ 1×16 PLC Splitter is a passive optical component designed to divide one incoming single mode optical signal evenly between sixteen output fibers.
Based on planar lightwave circuit technology, it provides stable optical power distribution across the 1260–1650nm operating wavelength range. The 1×16 configuration allows one feeder fiber to serve sixteen optical branches without powered switching equipment or an external power supply.
This version uses 0.9mm single mode ITU-T G.657A fiber and SC/UPC connectors. The UPC-polished interfaces provide standard low-loss connections for single mode optical networks, while the compact mini-module construction is suitable for installation in fiber distribution boxes, splice closures, wall-mounted enclosures, equipment cabinets, and optical test systems.
With maximum insertion loss of ≤14.0dB, loss uniformity of ≤1.0dB, and polarization dependent loss of ≤0.3dB, the splitter provides stable passive signal distribution for FTTH, GPON, EPON, XG-PON, XGS-PON, passive optical LAN, telecom distribution, and optical monitoring applications.
الميزات الرئيسية
- Standard 1×16 equal split configuration
- One optical input and sixteen optical outputs
- Approximately 6.25% nominal input power per output
- Single mode ITU-T G.657A optical fiber
- 0.9mm protected fiber leads
- SC/UPC connector termination
- 1260–1650nm operating wavelength
- Maximum insertion loss ≤14.0dB
- Loss uniformity ≤1.0dB
- Polarization dependent loss ≤0.3dB
- Return loss ≥55dB
- Directivity ≥55dB
- Fully passive operation
- No external power required
التطبيقات
- FTTH and FTTB networks
- GPON and EPON access networks
- XG-PON and XGS-PON distribution
- Passive optical networks
- Fiber distribution boxes
- Fiber splice closures
- Telecom transmission systems
- Passive optical LAN
- Optical signal monitoring
- الاختبارات البصرية المختبرية
المواصفات الفنية
| المعلمة | المواصفات |
|---|---|
| العلامة التجارية | لولوي |
| نوع المنتج | PLC Fiber Splitter |
| Split Configuration | 1 Input × 16 Outputs |
| Split Ratio | Equal 1:16 |
| Nominal Power per Output | Approximately 6.25% |
| نوع الموصل | SC/UPC |
| Package Type | Mini Module |
| وضع الألياف | الوضع الأحادي |
| نوع الألياف | ITU-T G.657A |
| Fiber Diameter | 0.9mm |
| Operating Wavelength | 1260–1650nm |
| Maximum Insertion Loss | ≤14.0 ديسيبل |
| Loss Uniformity | ≤1.0dB |
| Polarization Dependent Loss | ≤0.3 ديسيبل |
| خسارة العودة | ≥55dB |
| Directivity | ≥55dB |
| درجة حرارة التشغيل | -40°C to +85°C |
| Standard Fiber Length | 1 م |
| External Power Required | لا |
كيف يعمل
The incoming optical signal enters through one SC/UPC input and is evenly distributed between sixteen SC/UPC output fibers.
The splitter operates passively and requires no electrical power. Each output receives approximately one-sixteenth of the input optical power before the splitter’s additional insertion loss is considered.
You must be logged in to post a review.
Q & A
1x16 PLC Splitter, 0.9mm Mini Module, SC/UPC Single Mode
| Weight | 0.1 kg |
|---|---|
| Dimensions | 10 × 10 × 10 cm |
| نوع الموصل | SC UPC |
| نسبة المقسمات الضوئية | 1:16 |
| أنواع المقسمات الضوئية | مقسمات PLC الضوئية |
| Optical Splitters Mode | الوضع الأحادي |






















































SFP/SFP+ (1G/2.5G/5G/10G)
SFP-T (1 جيجابت/2.5 جيجابت/10 جيجابت)
كابل AOC 10G/25G/40G/100G
كابل DAC 10G/25G/40G/100G
QSFP28، QSFP+، SFP28، 100G/40G/25G
محولات الوسائط من النحاس إلى الألياف الضوئية
لوحة PCBA لمحول الوسائط الليفية
محولات الوسائط الليفية من OEO
محولات الوسائط من التسلسلية إلى الألياف الضوئية
محولات الوسائط من الفيديو إلى الألياف الضوئية
وحدة ONU GPON/EPON بسعة 1000 ميغابت/ثانية
وحدة ONU لشبكة EPON بسرعة 10 جيجابت/ثانية/XG-PON/XGS-PON
وحدة ONU من نوع STICK SFP بتقنية 2.5G GPON/XPON
وحدة ONU لشبكات POE GPON/EPON
جهاز ONT لاسلكي من نوع GPON/EPON
EPON OLT
وحدة OLT لشبكة GPON
وحدة SFP PON
المفاتيح الصناعية
المحولات المُدارة
محولات POE
المحولات غير المُدارة
كابلات الألياف الضوئية من نوع MTP/MPO
خراطيش الألياف الضوئية
حلقة إرجاع الألياف الضوئية
الكابلات البصرية وأطراف الألياف الضوئية
المقسمات الضوئية وصندوق المقسم
موصلات ذات شفة ليفية
المحولات البصرية
مخفف ضوئي
الموصل السريع ولوحة الموصلات
مضخم إشارة كابل التلفزيون (CATV)
جهاز استقبال ضوئي لشبكة الكابل التلفزيوني (CATV)
جهاز تحديد مواقع الأعطال البصري
OTDR
مقياس الطاقة الضوئية
جهاز تحديد الألياف الضوئية
منظفات الألياف الضوئية
مقصات الألياف ومقشرات الألياف
الأدوات النحاسية
Reviews
There are no reviews yet