SC UPC Bare Fiber Adapter Overview

Die SC-UPC-Adapter für blanke Glasfaser is a reusable fiber testing accessory designed to provide a temporary connection between prepared 125μm bare fiber and an SC/UPC optical test interface.

It allows technicians to connect bare fiber directly to an OTDR, optical power meter, optical light source, or compatible test instrument without installing a permanent fiber connector. The epoxy-free structure makes the fiber easy to insert, remove, and test repeatedly during fiber measurement, troubleshooting, and laboratory work.

The ceramic alignment core helps maintain stable fiber positioning and low connection loss. The adapter supports standard single mode and multimode fibers with 125μm cladding and provides insertion loss of ≤0.2dB under suitable fiber preparation and connection conditions.

Its compact reusable design is suitable for telecom maintenance, fiber production inspection, optical equipment testing, and laboratory applications. The bare fiber should be correctly stripped, cleaned, and cleaved before insertion to obtain consistent measurement results.

Wesentliche Merkmale

• Fixed SC/UPC male to bare fiber configuration
• Compatible with prepared 125μm bare fiber
• Supports single mode and multimode fiber testing
• Ceramic core for accurate optical alignment
• Einfügedämpfung ≤ 0,2 dB
• No epoxy or permanent termination required
• Easy fiber insertion and removal
• Kompakte und wiederverwendbare Bauweise
• Geeignet für Feld- und Laboruntersuchungen
• Plug-and-play connection to compatible instruments

Anwendungen

• OTDR-Prüfung
• Messung der optischen Leistung
• Prüfung optischer Lichtquellen
• Bare fiber continuity testing
• Fiber attenuation measurement
• Wartung von Telekommunikationsnetzen
• Fehlerbehebung bei FTTH und FTTX
• Prüfung der Faserproduktion
• Optische Laborprüfungen
• Temporary bare fiber connection

Technische Daten