How to Resolve XPON Stick Disabling on Mikrotik RB5009 When Using Fiber Cables

When using the Mikrotik RB5009 Router, some users encounter an issue where the LULEEY LL-XS2510 XPON STICK disables upon connecting a fiber cable. This article will guide you through understanding and resolving this problem.

Problem Description

Users have reported the following behavior:

• When Disconnecting the Fiber Cable: The XPON Stick enable on my Mikrotik RB5009 Router
• When Connecting the Fiber Cable: The XPON Stick disables, resulting in no link being established.

This issue can be frustrating, but fortunately, there are steps you can take to resolve it.

Solution

To fix the XPON Stick disabling issue, follow these steps:

Configure the Connection Speed:

• Start by setting the connection speed to 1G. This adjustment helps establish a stable connection between the router and the XPON Stick.

Activate Ignore Rx LOS(option):

• Navigate to the settings of your Mikrotik RB5009 Router and activate the Ignore Rx LOS option. This setting allows the router to disregard the loss of signal detection, which can interfere with the XPON Stick’s functionality.

Detect GPON:

• Once the configuration is complete, ensure that the system detects GPON (Gigabit Passive Optical Network).

• After successful detection of GPON, you can select the option to work with 2.5G BaseT. This setting should enhance the performance and stability of your connection.

Conclusion

By following these steps, you should be able to resolve the issue of the XPON Stick disabling when connecting the fiber cable to your Mikrotik RB5009 Router. Users have reported that after applying these configurations, their systems work great without further issues. If you continue to experience problems, consider checking for firmware updates with XPON STICK and Mikrotik RB5009.