XGS-PON Stick ONU SFP+ Transceiver, LL-XS1010 XG-PON ONU for FTTH Fiber Networks

Product Overview

The Luleey XGS-PON Stick ONU is a compact SFP+ ONU transceiver designed for XGS-PON and XG-PON FTTH broadband networks. It integrates ONU functionality and optical transceiver functions into an SFP+ stick form factor, allowing compatible routers, switches, firewalls, and network devices to connect directly to fiber broadband networks.

Unlike a traditional external ONT device, the LL-XS1010 XG-PON ONU SFP Transceiver can be inserted into a compatible SFP+ host device, helping reduce extra hardware, power adapters, and cabling. This makes it useful for advanced FTTH users, home lab builders, network engineers, ISP technicians, and users who need more flexible router-based fiber WAN deployment.

Built with the MaxLinear PRX126 chipset and 1GB RAM, this XGS-PON SFP+ Stick Module supports XGS-PON and XG-PON network solutions, 20km single mode fiber transmission, SC APC or SC UPC connector options, and configurable PON identifiers for compatible network environments.

The Luleey LL-XS1010 is suitable for OpenWRT systems, MikroTik routers, pfSense firewalls, OPNsense platforms, Linux-based routers, managed switches with compatible SFP+ ports, and advanced FTTH broadband access applications.

how to use

Features

• XGS-PON Stick ONU in compact SFP+ package
• Supports XGS-PON and XG-PON network solutions
• Designed for FTTH broadband access and fiber WAN deployment
• MaxLinear PRX126 chipset
• 1GB RAM for stable system operation
• SC APC and SC UPC receptacle options
• Supports up to 20km single mode fiber transmission
• 1270nm burst-mode upstream transmitter
• 1577nm continuous-mode downstream receiver
• Digital Diagnostic Monitoring support
• Community version and SSH version options
• Supports configurable PON identifiers including serial number, vendor ID, equipment ID, LOID, logical password, and MAC address
• Suitable for compatible MikroTik, OpenWRT, pfSense, OPNsense, Linux router, and managed switch environments
• Supports ITU-T G.988 OMCI management
• Supports VLAN tag manipulation, classification, and filtering
• Supports jumbo frames up to 9840 bytes
• Low power SFP+ design with 3.3V power supply
• Factory tested by Luleey for practical FTTH deployment

Applications

• XGS-PON FTTH Broadband Access
• XG-PON Fiber Access Networks
• Router SFP+ WAN Deployment
• OpenWRT Fiber WAN Integration
• MikroTik Router Fiber Access
• pfSense Firewall WAN Connection
• OPNsense Firewall WAN Connection
• Home Lab 10G Fiber Networking
• Compatible ISP ONT Replacement Projects
• FTTH ONU Stick Deployment
• Fiber WAN Testing
• Advanced VLAN and Router Control
• Compact Broadband Access Setup
• Direct Fiber Termination in Compatible Routers

Specifications

Parameter	Value
Brand	Luleey
Model	LL-XS1010
Product Type	XGS-PON Stick ONU SFP+ Transceiver
Supported Network	XGS-PON / XG-PON
Chipset	MaxLinear PRX126
RAM	1GB
Package Type	SFP+
Connector Options	SC APC / SC UPC
OS Options	Community Version / SSH Version
Fiber Type	Single Mode Fiber
Transmission Distance	Up to 20km
Upstream Wavelength	1270nm
Downstream Wavelength	1577nm
Transmitter	1270nm Burst-Mode 9.953Gb/s DFB Laser
Receiver	1577nm Continuous-Mode 9.953Gb/s APD-TIA Receiver
Optical Launch Power	+5dBm to +9dBm
Receiver Sensitivity	Down to -28.5dBm
DDM Support	Yes
Power Supply	3.3V
Power Dissipation	About 3W
Operating Temperature	0°C to +85°C
Management	ITU-T G.988 OMCI
Typical Use	FTTH, XGS-PON, XG-PON, router SFP+ WAN, home lab, compatible ISP fiber access

Why Choose an XGS-PON Stick ONU?

An XGS-PON Stick ONU is useful when users want to integrate fiber broadband access directly into a compatible router, firewall, switch, or SFP+ host device. Instead of using a separate external ONT, the ONU stick allows the fiber access module to be installed inside the networking device.

This can help users achieve:

• Cleaner network setup
• Reduced external hardware
• Fewer power adapters
• Direct fiber WAN integration
• Better router and firewall control
• More flexible VLAN configuration
• Compact home lab deployment
• Advanced FTTH broadband testing

For advanced users and network engineers, the Luleey XGS-PON Stick ONU provides a flexible way to build compact XGS-PON or XG-PON access environments.

XGS-PON vs XG-PON Notes

XGS-PON and XG-PON are both 10G-class PON technologies, but they are not always used in the same ISP network environment.

Technology	Typical Feature	Common Use
XG-PON	Asymmetric 10G-class PON	Selected FTTH and access networks
XGS-PON	Symmetric 10G-class PON	Modern multi-gigabit FTTH broadband

The Luleey LL-XS1010 supports XGS-PON and XG-PON network solutions, but the actual deployment depends on the ISP OLT, service profile, authentication method, firmware support, and optical network configuration.

Compatible Host Device Scenarios

This XGS-PON SFP+ Stick Module is commonly used in advanced networking environments where the host device provides a compatible SFP+ slot and sufficient power.

Typical host platforms include:

• MikroTik routers
• OpenWRT systems
• pfSense firewalls
• OPNsense platforms
• Linux-based routers
• Managed switches with compatible SFP+ ports
• Home lab routers and firewall appliances

Compatibility may vary depending on host device power supply, SFP+ cage support, firmware, heat dissipation, and network configuration.

Important ISP and Compatibility Notes

This product is not a universal plug-and-play replacement for every ISP ONT. Successful deployment depends on the ISP network, OLT compatibility, authentication method, and correct configuration.

Before deployment, confirm:

• ISP network type: XGS-PON or XG-PON
• OLT compatibility
• OMCI compatibility
• Required PON serial number
• Vendor ID requirements
• Equipment ID requirements
• LOID or logical password requirements
• MAC address requirements
• VLAN configuration
• Router SFP+ compatibility
• Power consumption limitation of the SFP+ host
• Heat dissipation inside the router or switch
• SC APC or SC UPC connector requirement
• Optical receive power level

Use this product only in compatible and authorized network environments.

Typical Optical Power Range

For stable XGS-PON or XG-PON deployment, optical receive power should stay within a suitable range.

Optical Power Level	Status
-8dBm to -18dBm	Excellent
-18dBm to -23dBm	Stable
-23dBm to -27dBm	Weak Signal
Below -27dBm	Possible ONU Disconnect

Maintaining proper optical power helps reduce registration failure, link instability, and broadband disconnection.

FAQ

What is an XGS-PON Stick ONU?

An XGS-PON Stick ONU is a compact SFP+ ONU module that integrates fiber access and optical transceiver functions for compatible FTTH broadband networks.

What is the Luleey LL-XS1010 used for?

It is used for XGS-PON and XG-PON FTTH access, router SFP+ WAN deployment, OpenWRT systems, MikroTik routers, pfSense firewalls, OPNsense platforms, home labs, and compatible fiber broadband networks.

Does this module support XG-PON and XGS-PON?

Yes. The LL-XS1010 supports XGS-PON and XG-PON network solutions.

What connector options are available?

SC APC and SC UPC connector options are available. Users should select the connector type that matches the fiber line and ISP optical socket.

What is the maximum transmission distance?

The module supports up to 20km transmission over suitable single mode fiber.

What wavelengths does it use?

It uses 1270nm upstream transmission and 1577nm downstream reception.

Does it support DDM?

Yes. Digital Diagnostic Monitoring is supported for optical and module status monitoring.

What is the difference between community version and SSH version?

The community version is suitable for users who need community firmware support, while the SSH version is suitable for users who require SSH access for advanced configuration. Choose according to your deployment and configuration requirements.

Can this replace my ISP ONT?

It may work in compatible and authorized ISP environments, but it is not a universal ONT replacement. ISP authentication, OLT compatibility, OMCI profile, VLAN settings, and PON identifiers must be confirmed.

Can I use it with MikroTik or OpenWRT?

Yes, it is commonly used with compatible MikroTik routers and OpenWRT systems, but host device SFP+ compatibility, power supply, heat dissipation, and configuration must be confirmed.

Can I modify the PON serial number or vendor ID?

The module supports configurable PON identifiers such as serial number, vendor ID, equipment ID, LOID, logical password, and MAC address for compatible network environments.

Why choose Luleey XGS-PON Stick ONU?

Luleey LL-XS1010 provides XGS-PON and XG-PON support, MaxLinear PRX126 chipset, 1GB RAM, SC APC/UPC options, 20km reach, DDM monitoring, community or SSH version options, and practical deployment for compatible FTTH fiber broadband and advanced router-based networks.